• Pre Punch Automatic C/Z Purlin Roll Forming Machine SF20
  • Pre Punch Automatic C/Z Purlin Roll Forming Machine SF20
  • Pre Punch Automatic C/Z Purlin Roll Forming Machine SF20
  • Pre Punch Automatic C/Z Purlin Roll Forming Machine SF20
  • Pre Punch Automatic C/Z Purlin Roll Forming Machine SF20
  • Pre Punch Automatic C/Z Purlin Roll Forming Machine SF20
  • Pre Punch Automatic C/Z Purlin Roll Forming Machine SF20
  • Pre Punch Automatic C/Z Purlin Roll Forming Machine SF20
DETAILS

 

Flow chart: De-coiler — De-coiler – Feeding and Leveling device – Pre-punching & cutting system – Roll Forming System – Hydraulic Cutting – Hydraulic station – PLC – Cutting Product Support

Pre Punch Automatic C/Z Purlin Roll Forming Machine SX20

Product Spec

Pre Punch Automatic C/Z Purlin Roll Forming Machine SX20 Pre Punch Automatic C/Z Purlin Roll Forming Machine SX20

Machine Specifications
WeightAbout 9800 kgs
SizeAbout 10.5m x1.65m x 1.7m

 

(length x width x height)

ColorMain color: blue
Warning color: yellow
Suitable Raw Material
Materialcold rolled coil , hot rolled coil, galvanized coil
Thickness1.0-3.0mm
Coil widthAccording to products size
Yield strengthQ195,Q235,Q345
Main Technical Parameters
Quantity of forming rollers stations18 Stations
Diameter of rollersΦ260MM
Diameter of shaftsø75/ø90mm
Roll Forming Speed0-25m/min
Production Speed12-18m/min(depends on quantity of punching)
Forming rollers materialCR12 mould steel, with quenched treatment
Cutter materialCR12 mould steel, with quenched treatment
Controlling systemPLC and Converter
Electric power requirementMain motor power:18.5KW
Hydraulic unit motor power: 7.5KW
Electric voltageAccording to customers requirement

  

Main Components:

1.Decoiler

De-coiler Type: Manuel de-coiler

Weight capacity: 5.0T

2. Feeding and Leveling Device

It used for making the material flat before feeding into the roll forming machine. use handler bar to operate the leveling up and down.

3. Hydraulic Pre-Punching

PLC control punching system.

Punching Type: Hydraulic Punching

Punching die material: Cr12

4. Pre-cutting system

Adopts post cutting, the cutting blade material is Cr12 with quenched treatment, after cutting, there is no wasted material.

5. Rolling Forming System

Main motor type: 3 phase asynchronous motor

Driving Type: Chain

Speed of forming: 12-18m/min( 25m/min without punching holes)

Roller : 19groups rollers.

Material of main shaft : NO.45 steel

Changing sizes: Automatic, change sizes by press button.

6. Post-cutting system—main cutter when chose post-cutting system.

Cutting material:  Cr12

For C and Z profile cutting

 7. Product Support Frame

  • The length of product support frame : 6m unpower

8. PLC Control System

Control the quantity &punching length & cutting length automatically  In English

Pre Punch Automatic C/Z Purlin Roll Forming Machine SX20 Pre Punch Automatic C/Z Purlin Roll Forming Machine SX20 Pre Punch Automatic C/Z Purlin Roll Forming Machine SX20 Pre Punch Automatic C/Z Purlin Roll Forming Machine SX20